Backpack practice (backpack practice and cutting video)

Backpack Practices, BAY888.com The world's leading slot game platform, providing exciting gaming experience and generic rewards. Join now and start your journey to victory!

List of contents for this article:

• 1、How to make a snack backpack
• 2、Practice of fabric backpack
• 3、Simple way to make your own backpack
• 4、The easiest way to backpack a badminton racket
• 5、Practice of riding a backpack
• 6、Practice of cloth bags on both shoulders

How to make a snack backpack

1. Prepare double-sided tape and scotch tape. There are 8 clever energy bars, and 4 of them are stuck together continuously to make 2 straps for the backpack.

2. The materials needed to make the snack backpack include several large bags of different types of snacks and some long snacks, which will be used to make the straps of the backpack. To start, remove five larger snack bags and arrange them in the order shown. Next, stand the snack bags at the edges and secure them together with tape to form the bottom of the schoolbag. It looks as shown in the following figure after completion.

3. Prepare the materials needed to make the snack backpack, including several large bags of different types of snacks and some long strips of snacks, which will be used to make the straps of the backpack. To start, take five larger snack bags and place them in the order shown. Stand the edges of the five packs of snack bags up and carefully wrap them around with tape to serve as the bottom of the backpack. The finished effect is as shown in the picture.

4. You can make backpacks with snacks. Common methods include using materials such as Wangzi milk candy, jelly or lollipop sheets. The following is the specific operation method: Using Wangzi milk candy to make Wangzi milk candy is hard and has a certain toughness, making it suitable as the main material of a backpack. It takes about 160 Wangzai milk candies to make a satchel (about 140 in a bag, two bags need to be prepared).

Practice of fabric backpack

There are many ways to make fabric backpacks. The following are a few common methods: Denim backpacks to make straps: Take two 50-cm long straps, pass them through the eye buckle, and place them 6 centimeters away from the eye buckle inward. Fold and sew them to fix them. Shoulder strap production: Mark the rear sewing mark line on the back of the shoulder strap cloth, trim the corners and turn them over to the front. Fold the sides inward with the eye buckle facing down to align the strap with the center line of the shoulder strap.

After making the cloth ears and bag, fix them on the table cloth, align the side seams and sew them, turn them over to the front and fix the bag straps. Make the inner patch bag and outer pockets with three back methods: Use gray and coffee color matching waterproof cloth, sew the two pieces of cloth around the front side, leave a 5 cm return opening, turn it over to the front side, iron it, and install it in the bag. Put it on the inside. The outer pocket is made of drawstring technology. The back side of the pocket is folded and ironed and then installed with air holes, elastic bands and pig nose buckles.

You can refer to the following methods to make simple fabric shoulder bags, and choose the appropriate style according to the materials and needs: Denim shoulder bags Making strap processing: Prepare two 50-cm long straps, pass through the eye button, and place the 6-cm position inward. Fold and sew them to fix them. Mark the position of the sewing line on the back of the shoulder strap cloth, trim the corners and turn them over to the front, fold the sides inward, and the eye buckle faces down to align with the center line of the belt.

Turn the bag body from the gap to the front, and finally sew the gap; sew small Xiangzi (decorative parts) at both ends of the four corners. Cloth flowers, leather signs, etc. can be selected as decoration according to design needs.

To make women's backpacks, materials need to be prepared and specific steps should be followed. The following are the specific methods: material preparation requires surface cloth, lining cloth, magnetic fastener, webbing, zipper, water-soluble double-sided tape, etc.

Children's Minnie backpack (woven fabric model) This model is realized through knitting technology and can adjust the length of the strap. It is suitable for those with a certain foundation of knitting. Material preparation: Knitted cloth (such as coarse wool or cloth strips), buttons, sewing thread, needles or sewing machines. Production steps: Knitting the main body: Use flat or cross stitches to weave the main body of the backpack, and the size is adjusted according to needs (such as length 30 cm and height 25 cm); the bottom can be thickened and knitted to enhance the load-bearing capacity.

Simple way to make your own backpack

Materials only need old backpack/canvas bag, scissors, rope, and old mats. Preference is given to light and breathable oxford cloth or canvas, and the interior is cut with old T-shirts as lining, which is environmentally friendly and cost-effective.① Transform the main body of the backpack and cut a round hole with a diameter of 15-20cm at the bottom of the old bag to serve as a dog entrance and exit. The edges are bound with old jeans strips to prevent wear. The adjustable straps are fixed with metal buckles on both sides to fit pets of different sizes.

The homemade backpack tutorial has the following size: Cut the required fabric. Bag body A has one front and rear piece, and the bag mouth contains 21CM seam, 25CM bottom width, and 23CM high. The bag lid B consists of two pieces: the inside and outside: the height of the seam is 15CM, and the width of the upper edge is 14CM. Small pocket under the lid: Note that 2CM of stitching needs to be left on the top. D Two shoulder straps: including stitching 5CM* 43CM, and beige herringbone webbing 2* 46CM.

The following steps can be selected according to different styles: Summer French backpack This backpack features lace fabric, and 4 pieces of table cloth (lace cloth) need to be prepared in advance. The specific paper pattern size needs to refer to the relevant display (marked as "lace (table cloth ×4)"). When making, first fold the two ends of the fabric inward by 5 mm and fix it. This step prevents the edges of the fabric from falling off and provides neat edges for subsequent stitching.

Travel bags are also called travel bags. As the name suggests, they refer to a type of bag prepared for travel or tourism. When leaving home for a long journey, doing things or sightseeing, or devoting themselves to nature and enjoying the sun and rain, you can put daily necessities or anything you want to bring with you to make it easy to carry. Travel bags can be divided into backpacks, tote and drag bags. When selecting, the volume and style should be considered. In addition, factors such as the user's size and body shape and weight-bearing ability should also be considered.

The easiest way to backpack a badminton racket

1. Summarize the quickest way to achieve a minimalist solution: only use grid sheets to weave the package body + icicle thread to hook weave the interlayer, and omit the cloth sewing step. Zero-cost solution: Cut the triangular bag from old fabric and match it with existing webbing and Japanese buttons. Precautions: Keep the stitches neat and tidy when stitching to avoid missing stitches; if woven materials are used, check whether the grid density is enough to bear the weight. This method is suitable for beginners and can complete a basic style backpack in 1-2 hours.

2. The method of carrying badminton on the body is mainly to put badminton rackets and badminton into special racket bags or racket bags, and then carry them on the shoulders. The specific steps are as follows: Install the racket: first put the racket into the racket bag, make sure that the racket head is down, so as to avoid unnecessary compression of the racket surface. Put the racket bag: Put the racket bag with badminton racket into the racket bag, and also pay attention to protect the racket surface from pressure.

3. Open the main storage area of the badminton backpack. Put the badminton in the specially designed bag of your backpack. Put other items into your backpack. Small items such as rackets, wristbands, handkerchiefs, water bottles, towels and other items are put into the side pockets or front pockets of the backpack.

4. First, choosing a comfortable backpack is the most important thing. The straps of the backpack should be wide enough, and the parts of the straps that contact the shoulders and neck should be soft padded, so that the pressure on the shoulders and neck can be reduced. In addition, the size of the backpack should suit your needs, and do not choose one too big or too small. Secondly, the weight of the backpack is also required.

5. This round bag that only holds the badminton racket head is often called the badminton racket head protective sleeve, and is often referred to as the racket head cover for short. It is mainly used to wrap the head area of the badminton racket. It can prevent the frame from bumping and peeling off the paint and being deformed and damaged during storage and carrying. Some styles will be designed to fit the round shape of the racket head, and some also have hanging buckles for convenience. Hanging on the outside of the backpack is a common accessory for badminton sports.

6. Yes, I carry all my 12 pieces with me. I'm afraid I'll crush the racquet, so there's no problem carrying it with me. However, it's more troublesome to put it in the luggage rack. However, your rackets and clothes and shoes can be carried with you, so you don't have to throw it in the luggage rack.

Practice of riding a backpack

If you need to increase stability, you can sew D-rings on both sides of the bag body, pass through and fix them with elastic ropes. This method is flexible and suitable for short rides or daily commuting. Adapted from the Tailai Riding Schoolbook Tutorial (Riding Bag Version) Material preparation: Refer to the bag making drawings, prepare the main fabric, interlining, zipper, shoulder straps and hardware. For lightweight, choose nylon or polyester fabric.

Leather cycling bag DIY If you choose leather material, you can refer to the design ideas of handmade bicycle bags or cycling bags. Such methods usually require planning the structure of the bag body (such as main bin, side pockets, fixing belts, etc.) in advance, but the specific cutting and sewing steps need to be adjusted according to the leather characteristics. For example, it is necessary to reserve suture margins, treat edge burrs, and design fixing devices (such as buckles or straps) to fit handlebars or rear shelves.

Hand-made denim single-shoulder riding satchel can be achieved through three methods: basic cutting method, multi-pocket practical model or sports backpack style. The specific steps are as follows: basic cutting method Material preparation: Select a pair of old jeans to ensure that the fabric is not damaged and The color is uniform. Cutting steps: Cut along the side stitches of the jeans, unroll and cut a rectangular piece of cloth 60 cm long and 20 cm wide.

There are many ways to secure a cycling backpack to the front of a bicycle. One common thing is to use a special head bag fastening strap. The straps usually come with devices such as clips or velcro that can be securely clipped to the handlebars of the bicycle and securely secure the backpack to the front. It is easy to install, can quickly load and unload the backpack, and can adjust the position as needed. Another way is to use the front fork mounting bracket of a bicycle.

The advantage is that it is completed in 5 seconds with one hand, and it can be loosened in seconds by gently pulling the rope head when untying it. It is suitable for quickly adjusting the backpack position during subway commuting. Cross-winding method: The anti-shedding enhanced version of the double belt is crossed three times to form a woven pattern, and the end is finished with a flat knot. The friction increased by more than 40%, and the measured backpack with a weight of 10kg shook violently and did not loosen it. When cycling enthusiasts use this method, it is recommended to wrap it with fluorescent ropes to increase night recognition.

They can be easily fixed on the owner of the car, providing a relatively stable space for the dog during riding, allowing the dog to comfortably accompany the owner when traveling. TOUCHDOG Pet and Dog Backpack: This brand has a large dog portable horizontal bag style, which can be used as an artifact for riding. It has a variety of back-carrying methods, such as single shoulder, diagonal span, hand holding, and can also serve as a chest and back clothing traction.

Practice of cloth bags on both shoulders

There are many ways to make backpack bags for shoulders. The following are a few common production steps: Use denim fabric to make a single-layer backpack preparation materials: denim fabric, strap, eye buckle, reinforcing fabric, zipper, pocket cloth, etc. Production steps: Pass the bag strap through the eye buckle, fold it inward at 6 cm, and sew it to fix it. Mark and sew the mark line on the back of the shoulder strap cloth, trim the corners and turn it over to the front.

Fixing and cutting: Stack two pieces of cloth together and fix it with clips, mark the midpoint position, draw a circle with a radius of 11cm, and cut the circle 1 cm away from the stitches. In this way, the cloth bag produced can achieve shape changes.

Sewing lining cloth is the same as sewing method for skin cover cloth. Sew the lining cloth to the surface cloth.

The key to making backpack with straps lies in the structural design and fixing method. A practical backpack can be completed by simply tying knots or sewing. Material selection and preparation To make a backpack, you need to prepare two nylon webbing or canvas belts (preferably 3-5 cm wide) more than 5 meters, two square fabrics (canvas or Oxford cloth is recommended) and metal fasteners. If you pursue personalization, you can choose colored webbing with patterned fabrics, such as canvas bags with fluorescent colored straps, which can both bear weight and look fashionable.